Mitsubishi 2013 Outlander User Manual

7-10
Vehicle care and maintenance
7
To replace the oil filter
The oil filter should be replaced at the time or mileage speci-
fied in the “WARRANTY AND MAINTENANCE MAN-
UAL”.
Only use high quality replacement filters on this vehicle. The
manufacturer’s specifications for Genuine Mitsubishi oil filters
require that the filter can withstand a pressure of 256 psi (1.8
MPa). A Genuine Mitsubishi oil filter is the best replacement
filter.
Follow the installation instructions printed on the filter.
Engine coolant
N00937800584
To check the coolant level
The engine coolant reserve tank (A) lets you quickly see when
you need to add coolant. When the engine is cold, the level of
the coolant in the reserve tank should be between the FULL
and LOW marks. The radiator usually stays full so there is no
reason to remove the radiator cap (B) except when you check
the coolant freeze point or replace the antifreeze coolant.
FULL
LOW
BK0150700US.book 10 ページ ２０１２年３月２２日 木曜日 午後６時４６分
Information Provided by:

Mitsubishi 2013 Outlander Specifications

General

Brand	Mitsubishi
Model	2013 Outlander
Category	Automobile
Language	English