7-56
Vehicle care and maintenance
7
Front turn signal lights
N00943400367
To remove
1. Remove the upper cover.
For information regarding how to remove the upper cover,
refer to “Removing and installing the upper cover and
duct” on page 7-14.
2. Turn the socket (A) counterclockwise to remove it.
3. Pull the bulb out of the socket.
To install
1. To install the bulb, perform the removal steps in reverse.
2. Install the upper cover.
For information regarding how to install the upper cover,
refer to “Removing and installing the upper cover and
duct” on page 7-14.
*- Front of the vehicle
BK0150700US.book 56 ページ ２０１２年３月２２日 木曜日 午後６時４６分
To Next Page
Loading...
Need help?
General
