Open the fuel tank filler tube by slowly
turning the cap anticlockwise.
Except for diesel-powered vehicles 1600 models
Diesel-powered vehicles 1600 models
1- Remove
2- Close
CAUTION
l
For diesel-powered 1600 models, the fuel
cap does not turn more than 90 degrees.
Turning forcibly could damage the fuel cap.
l
Since the fuel system may be under pressure,
remove the fuel cap slowly. This relieves
any pressure or vacuum that might have
built up in the fuel tank. If you hear a hissing
sound from the cap, wait until it stops before
removing the cap. Otherwise, fuel may spray
out, injuring you or others.
4. While filling with fuel, hang the fuel cap
cord on the hook located on the inside of
the fuel tank filler door.
5. Insert the gun in the tank port as far as it
goes.
CAUTION
l
Do not tilt the gun.
6. When the gun stops automatically, do
not fill with fuel any more.
7. Close the fuel cap.
[Except for diesel-powered vehicles
1600 models]
To close, turn the fuel cap slowly clock-
wise until you hear clicking sounds, then
gently push the fuel tank filler door
closed.
[For diesel-powered 1600 models]
Fit the fuel cap with the cap handle side-
ways and turn it clockwise.
Installation of accessories
E00200300963
We recommend you to consult a
MITSUBISHI MOTORS Authorized Service
Point.
l
The installation of accessories, optional
parts, etc., should only be carried out
within the limits prescribed by law in
your country, and in accordance with the
guidelines and warnings contained with-
in the documents accompanying this ve-
hicle.
l
Installing electric components incorrect-
ly could lead to a fire. Please refer to
Modification/alteration to the electrical
or fuel systems section within this own-
er’s manual.
Installation of accessories
2-04
OGAE15E5
General information
2
To Next Page
Loading...
Need help?
General
