1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)” on page 5-19.
2. Lightly press the multi-information me-
ter switch to select “RESET” (returning
to the factory settings).
3. When you press and hold the multi-in-
formation meter switch for about 5 sec-
onds or more, the buzzer sounds and all
of the function settings are returned to
the factory settings.
NOTE
l
The factory settings are as follows.
•
Average fuel consumption and average
speed reset mode: A (Auto reset)
•
Fuel consumption display unit: L/100 km
•
Temperature unit: °C (Celsius)
•
Display language: ENGLISH or RUSSI-
AN
•
Cooperative language setting: A
•
Operation sounds: ON (Operation sounds
on)
•
“REST REMINDER” display: OFF
•
Turn-signal sound: Turn-signal sound 1
•
Momentary fuel consumption with the
green bar graph (Type 2): ON
l
The low tyre pressure warning threshold and
tyre ID set cannot be returned to their facto-
ry settings.
Indication lamp, warning lamp, and information screen display list
E00523700013
Indication lamp, warning lamp, and information screen display list
5-26
OGAE15E5
Instruments and controls
5
To Next Page
Loading...
Need help?
General
