Changing the function settings
(when the ignition switch or the
operation mode is ON)
E00522701808
1. Stop the vehicle in a safe place.
Firmly apply the parking brake and put
the gearshift lever into the “N” (Neutral)
position (M/T) or the selector lever into
the “P” (PARK) position (A/T or CVT).
2. Lightly press the multi-information me-
ter switch a few times to switch from the
information screen to the function set-
ting screen.
Refer to “Information screen (when the
ignition switch or the operation mode is
ON)” on page 5-10.
CAUTION
l
For safety, stop the vehicle before operating.
While driving, even if you operate the multi-
information meter switch, the function set-
ting screen is not displayed.
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
NOTE
l
To return the menu screen to the function
setting screen, press and hold the multi-in-
formation meter switch for about 2 seconds
or more.
NOTE
l
If no operations are made within about 15
seconds of the menu screen being displayed,
the display returns to the function setting
screen.
4. Select the item to change on the menu
screen and change to the desired setting.
Refer to the following items for further
details on the operation methods.
Refer to “Changing the reset mode for
average fuel consumption and average
speed” on page 5-20.
Refer to “Changing the fuel consump-
tion display unit” on page 5-21.
Refer to “Changing the temperature
unit” on page 5-22.
Refer to “Changing the display lan-
guage” on page 5-22.
Refer to “Operation sound setting” on
page 5-23.
Refer to “Changing the time until
“REST REMINDER” is displayed” on
page 5-24.
Refer to “Changing the turn-signal
sound” on page 5-25.
Refer to “Changing the momentary fuel
consumption display” on page 5-25.
Refer to “Reset of low tyre pressure
warning threshold” on page 6-63
Refer to “Tyre ID set change” on page
6-64
Multi-information display
5-19
OGAE15E5
Instruments and controls
5