Mitsubishi ASX 2016 User Manual

2. Accelerate or decelerate to your desired
speed, then push down and release the
SET - switch (B) when the “CRUISE”
indication lamp is illuminated. The vehi-
cle will then maintain the desired speed.
NOTE
l
When you release the SET - switch, the ve-
hicle speed will be set.
To increase the set speed
E00609400697
There are 2 ways to increase the set speed.
RES + switch
Push up and hold the RES + switch (C) while
driving at the set speed, and your speed will
then gradually increase.
When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To increase your speed in small amounts,
push up the RES + switch for less than about
1 second and release it.
Each time you push up the RES + switch,
your vehicle will go about 1.6 km/h (1 mph)
faster.
Accelerator pedal
While driving at the set speed, use the accel-
erator pedal to reach your desired speed and
then push down the SET - switch (B) and re-
lease the switch momentarily to set a new de-
sired cruising speed.
To decrease the set speed
E00609500614
There are 2 ways to decrease the set speed.
SET - switch
Push down and hold the SET - switch (B)
while driving at the set speed, and your speed
will slow down gradually.
Cruise control*
6-56
OGAE15E5
Starting and driving
6

Mitsubishi ASX 2016 Specifications

General

Brand	Mitsubishi
Model	ASX 2016
Category	Automobile
Language	English