Vehi-
cle
condi-
tion
Switch
posi-
tion
“0” “0” “1” “2” “3”
●:1 person
:Full luggage loading
Switch position 0- Driver only/Driver + 1 front
passenger
Switch position 1- 5 passengers (including driv-
er)
Switch position 2- 5 passengers (including driv-
er) + Full luggage loading
Switch position 3- Driver + Full luggage loading
Automatic headlamp levelling (vehi-
cles with discharge headlamps)
E00517600453
This mechanism automatically adjusts the direction
of
the headlamps (beam position) depending on
changes in the condition of the vehicle, such as the
number of occupants or luggage weight. When the
headlamps are illuminated with the ignition switch
or the operation mode in ON, the beam position of
the headlamps is automatically adjusted when the
vehicle is stopped.
Headlamp automatic levelling system warning dis-
play
Type 1
Type 2
If there is a fault in the automatic headlamp level-
ling system, the warning display is displayed on
the information screen in the multi-information dis-
play.
CAUTION
l
If
a warning is displayed, the system may
be malfunctioning, so we recommend you
to have your vehicle inspected.
Turn-signal lever
E00506501231
1- Turn-signals
When
making a normal turn, use position
(1). The lever will return automatically when
cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to
change a lane, the turn-signal lamps and indi-
cation lamp in the instrument cluster will on-
ly flash while the lever is operated.
Also, when you move the lever to (2) slight-
ly then release it, the turn-signal lamps and in-
dication lamp in the instrument cluster will
flash 3 times.
NOTE
l
If the lamp flashes unusually quickly, the
bulb in a turn-signal lamp may have burned
out. We recommend you to have the vehicle
inspected.
l
It is possible to activate the following func-
tions.
Instruments and controls
3-49
3
To Next Page
Loading...
Need help?
General
