Error codes
E00710101256
If an error code appears in the display, take action in accordance with the table below.
Error display Problem Item Repair
NO DISC No disc inserted Disc is not in CD player. Insert disc.
ERROR 01 Focus error
Disc is not loaded correctly, or condensation on
disc.
Insert disc with label facing up. Remove
moisture from disc.
ERROR 02 Disc error
Disc is dirty, scratched, or deformed; or exces-
sive vehicle vibration.
Clean or replace disc. Retry when vibra-
tions stop.
ERROR 03 Mechanism error Loading or eject error. Pick-up is out of position.
Eject disc and reload. If disc will not eject,
have the equipment inspected.
ERROR HOT Inside of audio system is hot. Internal protection against high temperatures.
Allow radio to cool by waiting about 30 mi-
nutes.
ERROR
Communication or power supply
error
Communication error between external device
and audio equipment.
Power supply error of external device.
Consult a MITSUBISHI MOTORS Author-
ized Service Point.
For pleasant driving
5-35
5
To Next Page
Loading...
Need help?
General
