Mitsubishi ASX User Manual

2. Open the USB input terminal cover (A) in
the floor console box.
3. Connect
the Dock connector (C) to the iPod
(B).
NOTE
l
Use
a genuine Dock connector from Apple
Inc.
4. Connect the Dock connector (C) to the USB
input terminal (D).
CAUTION
l
Keep
the lid of the floor console box
closed while driving the vehicle. A lid or
the contents of the floor console box
could otherwise cause injuries.
NOTE
l
When
closing the floor console box, be care-
ful not to trap the connector cable.
5. To remove the Dock connector, turn the igni-
tion switch to the “LOCK” position or put
the operation mode in OFF first and perform
the installation steps in reverse.
Types of connectable devices and sup-
ported file specifications
E00762200015
Device types
E00762300188
Devices of the following types can be connected.
Model name Condition
USB memory device
Storage capacity of 256
Mbytes or more
iPod touch* F/W Ver.1.1.1 or later
iPod classic* F/W Ver.1.0 or later
iPod (fifth generation)* F/W Ver.1.2.2 or later
iPod nano (fifth genera-
tion)*
F/W Ver.1.2 or later
iPod nano (second gen-
eration)*
F/W Ver.1.1.2 or later
Models other than USB
memory devices and
iPods
Digital audio player sup-
porting mass storage
class
*: “iPod touch,” “iPod classic,” “iPod” and “iPod
nano”
are registered trademarks of Apple Inc. in
the United States and other countries.
NOTE
l
Depending on the type of the USB memory
device or other device connected, the connec-
ted device may not function properly or the
available functions may be limited.
l
Use the iPod whose firmware has been upda-
ted to the latest version.
l
You can charge your iPod by connecting it to
the USB input terminal when the ignition
switch or the operation mode is in ON or ACC.
l
Do not keep your USB memory device or
iPod in your vehicle.
l
It is recommended that you back up files in
case of data damage.
For pleasant driving
5-58
5

Mitsubishi ASX Specifications

General

Brand	Mitsubishi
Model	ASX
Category	Automobile
Language	English