TV+ separate UHF and VHF antennas
equipment you will need
If UHF and VHF signals are brought into your home witlh two
separate antennas, you'll need to combine the antennas before
connecting them to the TV. To do this you will need a UHF/VHF
combiner. (There are different combiners for different kinds of
leads. Check with your local electronics store for the kind of
combiner you need.)
Pictured below is a standard combiner.
To connect separate UHF and VHF antennas to your television:
O Connect the UHF and VHF antenna leads to the appropriate
terminals on the UHF/VHF combiner.
Press the combiner onto the antenna terminal on the television.
\\ I\_
VHF Antenna UHF Antenna
(Channels 2-13) (Channels 14-69)
o/// .......
\\\\\\\_I
#7//
-_ 300 D Flat Twin Lead
External
Antenna
or Cable
rh
\
300 Ohm to
75 Ohm Combiner
VHF I_
Back Side
300D Flat -
Twin Lead
TV Rear "£errninals
/fS,,oi.
28 Chapter 2: Connecting Your TV
To Next Page
Loading...
Need help?
General
