EasyManuals Logo
Home>Mitsubishi>Automobile>ECLIPSE CROSS 2017

Mitsubishi ECLIPSE CROSS 2017 User Manual

Mitsubishi ECLIPSE CROSS 2017
538 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #286 background imageLoading...
Page #286 background image
Warning for obstacles
If there is an obstacle in the vicinity of the
vehicle, a warning will be issued with the in-
formation screen in the multi-information
display and a warning buzzer.
1- Corner sensor
2- Front sensor
3- Back sensor
Front and corner sensor
Vehicle to obstacle
distance
Warning display/
sound cycle
Approximately 60 to
40 cm
Intermittent
Approximately 40 to
30 cm
Fast intermittent
Within approximate-
ly 30 cm
Continuous
Back sensor (vehicles without a towing
bar)
Vehicle to obstacle
distance
Warning display/
sound cycle
Approximately 125
to 80 cm
Intermittent
Approximately 80 to
40 cm
Fast intermittent
Within approximate-
ly 40 cm
Continuous
Back sensor (vehicles with a towing bar)
Vehicle to obstacle
distance
Warning display/
sound cycle
Approximately 125
to 100 cm
Intermittent
Approximately 100
to 60 cm
Fast intermittent
Within approximate-
ly 60 cm
Continuous
CAUTION
l
The distances given are to be used for refer-
ence only, as errors may be caused by vari-
ous factors, such as temperature, humidity,
or the shape of the obstacles.
NOTE
l
When the sensors detect different obstacles
at the same time, the information screen in
the multi-information display indicates the
directions of the obstacles each sensor is de-
tecting. However, closer obstacles are given
priority over other detected obstacles and the
warning buzzer sounds to inform you of
closer obstacles.
Changing the detection areas
E00648200111
The detection areas can be changed as fol-
lows:
Vehicles with a towing bar
While the operation of the system is stopped
at the “SONAR” switch, press the “SONAR”
switch approximately 3 seconds or more, and
release it. The buzzer sounds twice to indi-
cate that the detection area has been changed.
Vehicles without a towing bar
While the operation of the system is stopped
at the “SONAR” switch, press the “SONAR”
switch approximately 3 seconds or more, and
release it. The buzzer sounds once to indicate
that the detection area has been changed.
Parking sensors (Front/Rear)*
6-112
OGKE18E1
Starting and driving
6

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi ECLIPSE CROSS 2017 and is the answer not in the manual?

Mitsubishi ECLIPSE CROSS 2017 Specifications

General IconGeneral
BrandMitsubishi
ModelECLIPSE CROSS 2017
CategoryAutomobile
LanguageEnglish

Related product manuals