NOTE
l
When it rains or when the vehicle has been
washed, the inside of the lens sometimes be-
comes foggy. This is the same phenomenon
as when window glass mists up on a humid
day, and does not indicate a functional prob-
lem.
When the lamp is switched on, the heat will
remove the fog. However, if water gathers
inside the lamp, we recommend you to have
the lamp checked.
Bulb location and capacity
E01003201532
CAUTION
l
When replacing a bulb, be sure to use a new
bulb of the same type, wattage and colour.
If you install a different bulb, the bulb could
malfunction or fail to come on and could
lead to a vehicle fire.
Outside
E01003305153
1- Headlamps
Halogen: 55 W (HIR2)
LED: −
2- Position lamps/Daytime running lamps:
−
3- Front turn-signal lamps: 21 W (PY21W)
4- Front fog lamps*: 35 W (H8)
5- Side turn-signal lamps: −
Codes in parentheses indicate bulb types.
NOTE
l
The following lamps use an LED instead of
the bulb.
If you need to repair or replace these lamps,
contact a MITSUBISHI MOTORS Author-
ized Service Point.
•
Headlamps (LED type)
•
Position lamps/Daytime running lamps
•
Side turn-signal lamps (on outside rear-
view mirror)
1- High-mounted stop lamp: −
2- Tail lamps: −
3- Rear fog lamp (LHD vehicles): 21 W
(W21W)
Reversing lamp (RHD vehicles): 16 W
(W16W)
4- Licence plate lamps: 5 W (W5W)
Replacement of lamp bulbs
10-23
OGKE18E1
Maintenance
10
To Next Page
Loading...
Need help?
General
