Mitsubishi LU2-410 User Manual

3. LUBRICATING CONDITION
Check lubricating condition during machi
ne running by viewing oil drips through the
oil sight port.
I
(Motor maintenance)
Remove dust from the motor filter
every two or three months. (Continued
operation with lint- or dust-clogged
filter will cause the motor to overheat,
thereby reducing motor service life.)
5. HANDLING INSTRUCTIONS
4. ADJUSTMENT OF LUBRICATION TO
ROTATING HOOK
I
[ncrease Decrease ^
Adjust screw
Dustproof filter
(1) When the power is turned on or off, keep foot away from the pedal.
(2) Note that the machine may not be braked when the power is turned off or when power
failure occurs during operation.
(3) Be sure to close the control box cover during sewing operation. Otherwise, dust will enter
the control box, resulting in malfunction and trouble.
(4) Do not apply a multimeter to the control circuits. Voltage from the multimeter may damage
semiconductor parts.
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

Mitsubishi LU2-410 Specifications

General

Brand	Mitsubishi
Model	LU2-410
Category	Sewing Machine
Language	English