Mitsubishi LU2-410 User Manual

HOW TO USE THE SEV\/ING MACHINE
1. INSTALLATIONOF NEEDLES
Note: Install needles after turning off the power.
1 Needle
Needles are not fully
Put each needle into needle socket
until it stops at the bottom of needle Needles «
socket and turn 2 needles so that their inserted.
prime grooves face each other.
Then tighten set screws.
Needles are set in
wrong direction.
O
. Position needles with
their prime grooves
facing each other.
X
X
2. WINDING OF BOBBIN THREAD
[Adjustment]
Tension of wound thread: Slack winding is recommended for polyester and nylon threads.
Conically wound thread: Move the thread guide toward smaller diameter of wound
thread layer.
Quantity of wound thread: Loosen the thread quantity adjusting screw to increase, and
tighten to decrease, the quantity of wound thread.
Thread tension
adjust nut
Thread length
adjut screw
Note: When operating under no load, keep the
presser foot lifted.
Thread guide
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com

Mitsubishi LU2-410 Specifications

General

Brand	Mitsubishi
Model	LU2-410
Category	Sewing Machine
Language	English