Mitsubishi Q Series User Manual

5 - 23 5 - 23
MELSEC-Q
5 UTILITY PACKAGE (GX Configurator-TC)
[Explanation of items]
(1) Items
Setting item : Displays I/O signals and buffer memory names.
Current value : Monitors the I/O signal states and present buffer memory values.
Setting value : Enter or select values to be written into the buffer memory for test
operation.
(2) Command buttons
Current value display
Displays the current value of the item selected.
(This is used to check the text that cannot be
displayed in the current value field. However, in
this utility package, all items can be displayed in
the display fields).
Make text file
Creates a file containing the screen data in the
text file format.
Start monitor
/Stop monitor
Selects whether or not to monitor current
values.
Execute test
Performs a test on the selected items. To select
more than one item, select them while holding
down the Ctrl
key.
Close
Closes the currently open screen and returns to
the previous screen.
REMARK
The "Execute test" operation is explained below, using an example of writing data to
CH.1 set value (SV) setting.
(1) Click and choose the set value field of CH.1 set value (SV) setting.
(2) After entering a value, press the Enter
key.
Nothing is written to the Q62HLC at this point.
(3) Click the setting value field for write to the Q62HLC to select.
To write more than one setting item at the same time, select the items while
holding down the Ctrl
key.
(4) Click Execute test
to execute the write operation.
Upon completion of writing, the written value appears in the current value field.

Mitsubishi Q Series Specifications

General

Brand	Mitsubishi
Model	Q Series
Category	Control Unit
Language	English