IMPORTANT INFORMATION
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
5
Pub. No. K29001-00320 Revision: 1
Important Tips for Safety of
Work
To avoid a potential risk, you must thoroughly
understand the functions of this engine.
All involved personnel should actively
participate, recognize their roles, and organize
themselves and their work to ensure a safe
environment.
To prevent injury, fatal accident or damage to
this engine, you must obey the cautions,
compliance rules and normal directions of use
described in this manual while giving the
highest priority to safety. If you do not obey
them,
(a) it could result in death in the worst case.
(b) it could threaten your health.
(c) it may cause damage to this engine or the
devices.
Since there are many actions that cannot be
performed or must not be performed, it is
impossible to indicate every caution in this
manual or on warning labels.
As such, it is extremely important to follow
instructions in this manual and also to take
general safety measures when operating,
inspecting, and maintaining the engine.
The design incorporated measures evaluated
by the risk analysis and the risks which cannot
be eliminated by the protection devices are
described as warnings in this manual.
Descriptions about devices and facilities
outside the scope of our supply are included in
this manual.
For the devices and facilities outside the scope
of our supply, refer to the corresponding
manual of the generator and the supplier's
operation manual and obey the descriptions.
Electrical instruments must be inspected or
maintained by a person who has received
education and training for handling and
avoiding risks about the electrical instruments
on the machine, in addition to general
knowledge needed for electric construction
work.
To the User Company
The user company must obey the following points
and ensure safety management thoroughly.
General
When modifying this engine, changing the
specifications, and disassembling it, contact
your SME dealer "CONTACT LIST" (→ Page
8). If the customer modifies the engine or
changes the specifications, it could become
impossible to ensure safety.
Shanghai MHI Engine co., Ltd. (SME) cannot
foresee all potential dangers of the engine,
potential dangers resulting from human error
and other causes, or a danger caused by a
specific environment in which the engine is
used.
For the devices and facilities outside the scope
of our supply, provide the corresponding
manuals as "Usage Information" to the
operators and let them obey the descriptions.
SME will not bear a responsibility for damage
or injury caused by the devices and facilities
outside the scope of our supply.
In some countries or regions, this engine
cannot be used depending on the laws,
regulations and installation environment.
When transferring this engine to a third party,
check the regional conditions of them and
contact your SME dealer "CONTACT LIST" (→
Page 8).
To Next Page
Loading...
Need help?
General
