Mitsubishi S6R2 User Manual

5-2
Chapter 5 ENGINE OIL
Engine Oil Specification
Use engine oil which meets the requirements specified in the table below.
Table 5-1 Recommended Limit of Engine Oil Properties
Item Unit Recommended limit Test method
API/JASO CF class *1 -
SAE viscosity - 15W-40 -
Color ASTM - L4.0
JIS K 2580
ISO 2049
Density 15°C [59°F] g/cm
3
0.87 to 0.90
JIS K 2249
ISO 3675
ISO3838
ISO 649-4
ISO 91-1
Kinetic Viscosity:
40°C [104°F]
mm
2
/s
100 to 110 JIS K 2283
ISO 3107
ISO 2904
150°C [302°F] 13.5 to 15.5
Viscosity - -
JIS K 2283
ISO 3107
ISO 2904
Flash point °C [°F]
225 to 250
[437 to 482]
JIS K 2265
ISO 3679
ISO 2719
ISO 2592
Base
number
Hydrochloric
acid method
Sulfur contents
of fuel
1.0 weight %
or lower
mgKOH/g
10 or higher
(up to 13)
JIS K 2501
ISO 3771
ISO 6618
ISO 6619
ISO 7537
0.2 weight %
or lower
8 or higher
(up to 13)
Perchloric
acid method
Sulfur contents
of fuel
1.0 weight %
or lower
mgKOH/g
13 or higher
(up to 16)
0.2 weight %
or lower
11 or higher
(up to 16)
Acid number mgKOH/g 1.5 to 2.0
JIS K 2501
ISO 3771
ISO 6618
ISO 6619
ISO 7537
Sulfur content % 0.5 or less
JIS K 2541
ISO 4260
ISO 8754
Sulfuric acid ash % 2.0 or lower
JIS K 2272
ISO 3987
ISO 6245
Carbon residue content % 2.0 or lower
JIS K 2270
ISO 10370
ISO 6615
High temperature shear viscosity
150°C
[302°F]
mP·aS 3.7 or higher JPI-5S-36-91
Pour point °C [°F] -25 [-13]or lower
JIS K 2269
ISO 3015
ISO 3016

Mitsubishi S6R2 Specifications

General

Brand	Mitsubishi
Model	S6R2
Category	Engine
Language	English