EasyManuals Logo
Home>Mitsubishi>Engine>S6R2

Mitsubishi S6R2 User Manual

Mitsubishi S6R2
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #77 background imageLoading...
Page #77 background image
8-1
Chapter 8 PERIODIC INSPECTION AND MAINTENANCE PROCEDURES
Basic Engine
Engine External - Inspect
Inspect the engine exterior as described below.
1. Make sure there is no combustible material near the engine or battery. Also, check to make sure that the engine
and battery are clean. If combustible materials or dust are found near the engine or battery, remove them.
2. Check the electrical wiring for such components as the starter and alternator for looseness.
3. Check the whole engine for leaks of fuel, engine oil or coolant. If leaks are found, repair or contact your local
dealer.
4. Check that valves, plugs or cocks are properly positioned.
Fuel feed valve: Open
Coolant drain cock (plug): Closed
Engine oil drain plug: Closed
Be sure to keep combustible materials away from the engine, especially from the hot engine parts such as exhaust
manifolds, or the battery. Check for fuel and oil leaks. Remove dust from the top surface of the battery. A fire can
be caused by combustible materials placed near hot engine parts. If any abnormality is found, be sure to repair it
or contact your local dealer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi S6R2 and is the answer not in the manual?

Mitsubishi S6R2 Specifications

General IconGeneral
BrandMitsubishi
ModelS6R2
CategoryEngine
LanguageEnglish

Related product manuals