Assembly instructions BA-100155
Control unit MonTurn
12
3 Safety
This chapter provides an overview of all necessary safety aspects with regard to the personnel and a safe and
trouble-free operation.
3.1 Use for intended purpose
The Control unit MonTurn is intended for controlling the TB40 conveyor. The direction of rotation (conveying
direction) and the speed (conveying speed) must be specified by the Control unit MonTurn. For example, it is not
suitable for operating other conveyor belts or devices of any kind.
Intended use includes following all instructions in this manual.
Any use other than or beyond intended use is considered misuse.
3.2 Safety instructions
WARNING!
The safety instructions, in particular those relating to electrical connections, must be
followed in all phases of commissioning, operation and during maintenance and repairs.
Failure to follow these instructions is considered a misuse of the MonTurn and its
components.
3.3 Warranty
Any use other than the intended use according to 3.1 shall void the claim to warranty.
WARNING!
Danger from misuse!
A misuse of the MonTurn may result in dangerous situations. Refrain from the following uses:
– Exposure to direct light from UV lamps.
– Operation in air containing smoke, dust, water vapor, or solvents.
– Use in areas with explosion hazard (flammable gases, vapors or dust).
– Use in a damp environment (rain or dew).
– Do not exceed maximum permissible total weight.
– Connecting, commissioning or servicing of the machine without qualified personnel.
To Next Page
Loading...
Need help?
General
