Assembly instructions BA-100155
Control unit MonTurn
18
5 Commissioning
5.1 Installation and commissioning
WARNING!
Improper installation can result in injury!
Improper installation and commissioning can result in severe injuries and considerable
property damage.
– Make sure there is enough space to perform the installation before starting the
work.
– Handle open, sharp-edged components with care.
– Keep installation space clean and orderly! Components and tools that are lying
around or carelessly stacked pose an accident hazard.
– Install components properly. Follow the specified bolt torques.
– Secure components against dropping or falling over.
Before commissioning:
– Make sure that all installation work has been performed and completed according
to the specifications and instructions in this manual.
– Make sure there are no persons in the hazard zone.
DANGER!
Work on the power hook-up and controller must exclusively be performed by a skilled
electrician.
WARNING!
Only use skilled personnel to perform installation work.
To Next Page
Loading...
Need help?
General
