EasyManuals Logo

Motorola APX 6000 User Manual

Motorola APX 6000
200 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background image
English
Sending an Emergency Call
To exit emergency at any time, press and hold
the Emergency button.
Sending a Silent Emergency Call
To exit emergency at any time, press and hold
the Emergency button.
Display Status Icons
1 Press the Emergency button.
2 Press and hold the PTT button. Speak clearly
into the microphone.
3 Release the PTT button to end call.
4 Press and hold Emergency button to exit
emergency.
1 Press the Emergency button.
2 The display does not change; the LED does
not light up, and there is no tone.
3 Silent emergency continues until you:
Press and hold the Emergency button to exit
emergency state.
OR
Press and release the PTT button to exit the
Silent Emergency Alarm mode and enter
regular dispatch or Emergency Call mode.
Receiving a call or data.
Transmitting a call or data.
u
t
Blinks when the battery is low.
The more stripes, the stronger the
signal strength for the current site
(trunking only).
Direct radio to radio communication or
connected through a repeater.
On = Direct
Off = Repeater
This channel is being monitored.
L = Radio is set at Low power.
H = Radio is set at High power.
Scanning a scan list.
Blinking dot = Detects activity on the
Priority-One Channel
during scan.
Steady dot = Detects activity on the
Priority-Two Channel
during scan.
The vote scan feature is enabled.
8
v
O
M
HOR .
i
j
k
On = Secure operation.
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
On steady = View mode
Blinking = Program mode
On = AES Secure operation.
Off = Clear operation.
Blinking = Receiving an encrypted
voice call.
On = feature enabled, and signal
available.
Off = feature disabled.
Blinking = feature enabled, but signal
unavailable.
On = User is currently associated with
the radio.
Off = User is currently not associated
with the radio.
Blinking = Device registration or user
registration with the server
failed due to an invalid
username or pin.
Data activity is present.
Bluetooth is ready.
Bluetooth is connected to the device.
m
l
G
n
o
b
a
Menu Navigation
< or > to Menu Entry.
{, |, or } directly below Menu
Entry to select.
H to exit.
U or D to scroll through sub-list.
{, |, or } directly below Menu
Entry to select.
APX_6000_M3.book Page 4 Wednesday, October 30, 2013 6:16 PM

Table of Contents

Other manuals for Motorola APX 6000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Motorola APX 6000 and is the answer not in the manual?

Motorola APX 6000 Specifications

General IconGeneral
Frequency Range700/800 MHz, VHF, UHF Range 1, UHF Range 2
IP RatingIP67
P25 Phase 1 & 2Yes
GPSYes
EncryptionAES, DES
Power Output1-3 Watts (700/800 MHz)
Operating Temperature-30°C to +60°C
Intrinsically SafeYes
BluetoothYes (Bluetooth 4.0)

Related product manuals