Motorola AX Series User Manual

25
5.6 Hands-free
1. During a call, press t to switch to hands-free speaking mode.
2. To switch back to the receiver, press t.
5.7 Adjusting the call volume
During a call, press u to increase and d to decrease the volume level. There are 10
levels to choose from, volume 1-10 (where 10 is the maximum volume).
5.8 Muting a call
1. During a call, press Mute , m is displayed.
2. To turn mute o, press Unmute .
5.9 Adjusting the ringer volume
In standby, press u or d and then scroll u or d to select the desired volume level.
Press Select .
Or, press and hold to turn the ringer o. Press and hold again to turn the ringer
back on.
While the phone is ringing, press u or d to select the desired volume level.
5.10 Temporary tone dialing
If your telephone line service requires pulse or rotary dialing, you can temporarily
switch over to touch-tone dialing after the call connects.
1. During a call, press and hold , T is displayed.
2. Dial the number, the digits will be sent as touch-tone signals.
Note
When the call ends, the dial mode will automatically return to pulse dial mode.
5.11 Intercom
5.11.1 Making an internal call
If more than one handset is registered to the base, an internal call can be made
between handsets.
1. If 2 handsets are registered to the base, press and hold u and the other handset
rings automatically.
2. If 2 or more handsets are registered to the base, press and hold u and scroll d
to select the handset that is to be called, press Select .
5.11.2 Receiving an internal call
When an internal call is received, the handset name or number that is calling is
displayed.
1. Press Silence to stop the handset ringing.
2. Press Reject to reject the call.
3. Press t to answer the call.
Using the phone

Motorola AX Series Specifications

General

Brand	Motorola
Model	AX Series
Category	Telephone
Language	English