24
Handset settings
5.4 Handset name
If you are using more than one handset with your C1 base, you can set a
personalized name for each handset to easily distinguish between them.
A name can be up to 10 characters long.
1. Press
, scroll to
HANDSET
and press .
2. Scroll
to
NAME
and press .
3. Enter the new handset name and press
to conrm.
Delete the current name by pressing
.
NOTE
The handset name will only be displayed for approximately 20 seconds
when no button is pressed. If you make a mistake, press
to delete the
last character or digit.
See “ENTERING NAMES” and “WRITING TIPS” on page 21.
5.5 Language
1. Press , scroll to
HANDSET
and press .
2. Scroll
to
LANGUAGE
and press .
3. Press
or to select your preferred language and press
to conrm.
5.6 Key beep
When you press a button on the handset keypad, you will hear a beep. You
can switch these beeps on or off.
1. Press
, scroll to
HANDSET
and press . The display shows
BEEP
.
2. Press
to select. The display shows
KEYTONE
.
3. Press
to select.
4. Press
or to select
ON
or
OFF
and press to conrm.
5.7 Battery low warning beep
When the battery is almost fully discharged, you will hear a warning beep
every minute during a call. You can switch these beeps on or off.
1. Press
, scroll to
HANDSET
and press . The display shows
BEEP
.
2. Press
to select.
3. Scroll
to
LOW BATTERY
and press .
4. Press
or to select
ON
or
OFF
and press to conrm.
To Next Page
Loading...
Need help?
General
