38
Using the answering machine
If recording your own Answer Only message, remember to advise your caller
that they will not be able to leave a message.
To reinstate either pre-recorded message, delete your own message.
10.8 Select the OGM
Using the handset:
1. Press
, scroll to
TAM SETTINGS
and press .
2. Scroll
to
ANS MODE
and press .
3. Press
or to select either
ANS AND REC
or
ANS ONLY
and press
to conrm.
10.9 Re-instate the pre-recorded OGM
You can delete your own outgoing message and return to the pre-recorded
outgoing message.
Using the handset:
1. Press
, scroll to
TAM SETTINGS
and press .
2. Scroll
to
OGM SETTING
and press .
3. Scroll
to
DELETE OGM
and press .
4. Press
or to select either
ANS AND REC
or
ANS ONLY
and press .
Your personal OGM has been deleted and the pre-recorded OGM will
be played.
NOTE
You cannot delete the pre-recorded OGMs.
10.10 Answer delay
Answer delay sets the number of times your C1 product will ring before the
answer machine picks up your call and starts playing the outgoing message.
You can change this setting to between 2-9 rings or Time Saver. The default
setting is 6 rings. When the answer on / off setting is set to off, the answer
delay is 20 rings.
Using the base:
1. Press and hold the
button and release after the number of
rings required.
To Next Page
Loading...
Need help?
General
