39
Using the answering machine
Using the handset:
1. Press
, scroll to
TAM SETTINGS
and press .
2. Scroll to
ANS DELAY
and press . The handset will display the current setting.
3. Use
or to select the number of rings required and press
to conrm.
10.11 Time saver
When you call from another phone to access your messages remotely, if
your answering machine is set to time saver and you have new messages
it will answer after 2 rings, if you do not have any new messages, it will
answer after 5 rings. This means you can hang up after 3 rings knowing
you have no new messages, saving you time and the cost of the call. Your
handset will automatically return to standby if no button is pressed for 15
seconds or more.
10.12 Record a memo
You can record memo messages for other users which can be played back
just like normal messages. Memos can only be recorded using the handset.
Using the handset:
1. Press
, scroll to
TAM SETTINGS
and press .
2. Scroll
to
MEMO REC
and press . Place the handset to your ear
and you will hear, ’Please speak your messages after the tone. To end
recording, press #’, then a beep is heard.
3. You can now record your memo by speaking into the handset, press
to end recording.
10.13 Call screening
When the answering machine is on and takes a call, you can use the
loudspeaker to listen to the caller leaving a message.
The handset display will show
SCREEN
?. Press to begin screening the call
via the handset. If you wish to take the call while screening, press
.
10.14 Memory full
If the memory becomes full during recording the machine announces, ’Sorry,
the memory full’, and ends the call.
When the memory is full, the machine automatically switches to the Answer
Only outgoing message.
Your C1 product can store up to a maximum of 12 minutes recording or
59 messages.
To Next Page
Loading...
Need help?
General
