Programming Mode
24
Programming Mode
Programming mode allows you to change the following settings on your radio:
• Channel
• Configure the operating frequency from a pre-programmed frequency list
• Interference eliminator code
• Call tones
• Microphone gain
• Scan list
• Available channels
Note:
• To talk with someone on your two-way radio, the channel , frequency, and interference
eliminator code must be the same on both radios.
• You cannot enter programming mode while a VOX accessory is plugged into the radio.
6864110w16r_EN-FR.book Page 24 Tuesday, June 23, 2020 3:30 PM
To Next Page
Loading...
Need help?
General
