Advanced Features
31
6. To clone another radio, repeat steps 3 and 4.
7. To exit programming mode on the source radio, press and hold
Push to Talk
until no longer appears.
Advanced Features
You can set the following features by pressing and holding additional buttons while
turning the radio on.
To Do This
Press This
Button While
Turning
the Radio On
Default
Setting
Turn Keypad Tones On/Off
Turns keypad beeps off for silent keypad operation.
On
Turn End-of-Transmission Tone On/Off
If enabled, your two-way radio transmits a tone
when you finish transmitting (like saying Roger or
Over).
If keypad tones are off and end-of-transmission tone
is on, you will not hear the end-of-transmission tone,
but it is transmitted.
Off
6864110w16r_EN-FR.book Page 31 Tuesday, June 23, 2020 3:30 PM
To Next Page
Loading...
Need help?
General
