Motorola CT610 User Manual

31
Using your answering machine
9.8.2 Change the remote access PIN
1. Select Menu , Answer Phone is displayed, press OK .
2. Scroll d to Answer settings and press OK .
3. Scroll d to Remote access and press OK .
4. Scroll d to Change access PIN and press OK .
5. Read the message prompt, press OK .
6. Enter your old 4 digit PIN and select OK .
7. Enter the new 4 digit PIN, select OK , then enter the new PIN again and
select OK . The display will show Access PIN saved .
9.8.3 Turn remote access on or o
You cannot turn Remote access On until you have set a remote access PIN.
The default setting is O.
1. Select Menu , Answer Phone is displayed, press OK .
2. Scroll d to Answer settings and press OK .
3. Scroll d to Remote access and press OK .
4. On/O is displayed, press OK .
5. Press u or d to display On or O and select OK . Saved will be displayed.
Note
Remote Access must first be enabled to allow you to switch on the answer
machine remotely.
9.8.4 Remote access the answering machine
1. Dial your telephone number. When you hear your outgoing message,
press *.
2. Enter your 4-digit PIN 4you will hear a confirmation beep. Use the keypad
to operate the answering machine.
Press 0 to hear the main menu Press 5 to set answering machine On/
Off
Press 1 to replay current message Press 6 to skip forward to next
message
Press 2 to play all messages Press 8 to play your outgoing
message
Press 3 to delete the current message Press 9 to record a new outgoing
message
Press 4 to skip back to previous
message
Press # to set answer mode (from
menu)

Motorola CT610 Specifications

General

Brand	Motorola
Model	CT610
Category	Telephone
Language	English