7
Getting started
1. Getting started
Location
Important
Do not place your CT610 in the bathroom or other humid areas.
Place your CT610 base within reach of the AC power outlet and telephone wall
jack. The socket-outlet should be installed near the equipment and should be
easily accessible.
Connecting the handset and base
1. Plug the telephone line cord into the socket marked on the underside of
the base and the other end of the line cord into the telephone line wall jack.
2. Plug the AC power jack into the socket marked on the underside of the
base and plug the AC adaptor into the AC power outlet. Switch on the AC
power.
3. Plug the curly cord into the socket marked on the underside of the base
and the other end of the curly cord into the handset.
To Next Page
Loading...
Need help?
General
