22
English
GETTING STARTED
If your radio is equipped with a transmit time out
timer (TOT), a warning tone
will
sound a few seconds before the transmission is
cut off. Your radio may be programmed to inhibit
retransmission within a preset time.
Receiving a Call
1. Turn your radio on and adjust the volume
level.
2. Switch to the desired radio channel.
3. If, at any time, a call is received you will
hear the call at the volume level you have
set.
Note: The system may have a limited call time and
the call may be terminated automatically if
this call time is exceeded.
Cancelling a Call
At any time while setting up a call it may be
cancelled by pressing the Monitor/Call Cancel
button.
The call timer can also cancel a call.
Ending a Call
A call should always be ended by pressing the
Monitor/Call Cancel button.
To Next Page
Loading...
Need help?
General
