30
English
UTILITIES
UTILITIES
The utilities described below are programmed
into your radio by your dealer and are accessible
either via a programmable button or via the
menu.
SCAN
You can monitor several channels in order to
receive any call that is transmitted on any of
these channels. Sixteen different channels can
be programmed into each scan list. Each
channel can share the same scan list or have
different scan lists assigned to them.
Once the radio’s scan operation is activated and
the radio detects a call coming through a channel
in its scan list, it switches to that channel for you
to receive the call.
STARTING OR STOPPING SCAN
You can start or stop a scan operation by using a
preprogrammed Scan button or via the menu,
either when the radio is in the IDLE STATE or
when in a call.
Using the Scan Button
1. Press the Scan button to start scanning.
The scan start alert tone
will sound and the display icon G lit .
2. Press the Scan button again to stop
scanning. The scan stop alert tone
will sound and the display
icon G is
extinguished.
To Next Page
Loading...
Need help?
General
