31
English
UTILITIES
Using the Menu
The scan start alert tone will sound, the display
icon G will be lit and the LED indicator will blink
green during a scan operation. When a call on a
channel is detected the LED will stop blinking
and the channel number will be displayed.
PRIORITY CHANNEL
A scan list may contain a priority channel. This
means that a particular channel (for example, a
commonly used channel) may be checked more
frequently than other channels in the list during a
scan operation. Priority channels are
programmed into your radio scan lists by your
dealer, however when a priority channel is
included in a scan list, the scan icon changes
from G to H.
TALKBACK
If the programmable Talkback option is set, you
can respond to any calls received during the
scan operation by pressing the
PTT button
before the programmed hang-time ends. Check
with your dealer for details.
1 Ensure radio is in IDLE STATE, or in a call.
2 c to enter Menu Mode.
3 + or e until:
4 c to select
5 + or e until:
6 c to select
Display shows
current status e.g. :
7 + or e until:
8 c to select
Display shows:
(for 2 seconds)
9 Radio exits menu
mode and display
shows e.g.:
Utilities
Scan
Off
On
Selected
Chan: 05
To Next Page
Loading...
Need help?
General
