28
English
RADIO CALLS
Method 1
Turn the rotary knob (1) clockwise or
counterclockwise until you reach the desired
status indicated on the display.
Method 2
Once the desired status is displayed, there are
two methods to select the status:
Method 1
Method 2
Press the PTT button or Call 1-4 to select and
make the call. Call 1-4 are preprogrammed call
buttons.
Note: During a call you may enter the status list as
described above and make another status
call to a third party or initiate a new status
call.
To send status message to another radio, select
radio Alias/ID from Contact List via menu and
send as detailed.
Receiving a Status Call
Your radio receives a Status Call when:
Where Status message “04” / “On Break” is
example status message. Note that status
number (04) only will be displayed if associated
message is not programmed into your radio.
+ or e until:
f
(e.g On Break)
(e.g. 04)
c to confirm your selection.
Display shows:
(for 2 seconds)
Message Alias
Number
Selected
1 Individual Call alert
sounds
2 Display shows:
or
alternating with
Stat: On Break
Stat: 04
Alias/Number
To Next Page
Loading...
Need help?
General
