Motorola IT.6.2T User Manual

51
Settings
1. Press Menu ,scrollto Settings andpress OK .
2. Scrollto
Call Settings andpress OK .
3.
Conference call ishighlighted,press OK .
4. Scrollto
Auto or Off andpress OK .
5. Press
toreturntostandby.
14.4.2 Set the different calling codes
Ifyouaredownloadingyourphonebookfromyourmobileyoucansetthe
phonetoremovethecallingcodeinformationfromlocalnumberstoavoid
unsuccessfulcallswhenyoudialfromthehomeline.
Thereare2differentcodesthatcanbeset,countrycode(6digits)andlocal
code(6digits).
1. Press
Menu ,scrollto Settings andpress OK .
2. Scrollto
Call Settings andpress OK .
3. Scrollto
Country Code or Local Code andpress OK .
4. Usingthekeypad,enterthecodeandpress
OK.
5. Press toreturntostandby.
14.4.3 Set the auto prex
Thisfeaturechecksandformatsapre-dialledoutgoingnumberbeforeitis
dialledout.
Youcansetadetectnumberthatcanbeupto6digits,oncethisnumber
hasbeensetthephonewillchecktherstfewdigitsoftheanypre-dialled
numberandiftheymatchthedetectnumberwillreplacethemwiththe
prexnumber.
1. Press
Menu ,scrollto Settings andpress OK .
2. Scrollto
Call Settings andpress OK .
3. Scrollto
Auto Prefix andpress OK .
4. Usingthekeypad,entertheprexnumberandpress
OK.
5. Press toreturntostandby.
14.4.4 Recall mode
RecallisusefultoaccesscertainnetworkservicesandPABX/switchboard
services.
ThedefaultrecallmodepresetintheIT.6Tissuitableforyourcountry
networkandthereforeyoushouldnotneedtochangeit.
NOTE
The use of the IT.6T cannot be guaranteed on all PABX.
1. Press
Menu ,scrollto Settings andpress OK .

Motorola IT.6.2T Specifications

General

Brand	Motorola
Model	IT.6.2T
Category	Cordless Telephone
Language	English