Motorola IT.6.2T User Manual

9
Getting started
Connecting the base
1. Plugthetelephonelinecordintothesocketmarked ontheunderside
ofthebase.
2. Plugthepoweradaptorintothesocketmarked
ontheundersideof
thebaseandplugtheotherendintothemainspowerwallsocket.Switch
onthemainspower.
Charging the handset
1. Ifyouarechargingthebatteryforthersttime,placethehandsetonthe
basetochargeforatleast24hourscontinuously.
2. Whenthehandsetisfullycharged,
iconwillappearsteadyonthe
display.Plugtheotherendofthetelephonelinecord(makesurethatone
endisalreadypluggedintothebase)intothetelephonewallsocket.
NOTE
You cannot access the battery in the handset. Do not attempt to remove the
battery, as you may damage the phone. If you need to replace the battery,
contact customer service helpline found in this user guide.

Motorola IT.6.2T Specifications

General

Brand	Motorola
Model	IT.6.2T
Category	Cordless Telephone
Language	English