26 Clock & Alarm
6. Clock & Alarm
If you subscribe to your network’s Caller ID service and Auto clock is set to ON, the time
on your IT6 may be set automatically each time you receive a call, depending on your
network provider.
You can also set or adjust the time using the
Clock/Alarm
menu.
6.1 Setting the date and time
1. Press and scroll d to
Clock/Alarm
. Press M. Display shows
Date & Time
, then press
M.
2. Enter the date using the format
MM/DD
e.g. 08/04 for August 4th.
3. Enter the time using the 12 hour format
HH:MM
, e.g. 02:45.
4. Press
u or d to change from
A
(am) to
P
(pm) and press M.
5. Press
e to return to standby.
6.2 Setting the alarm
1. Press M, scroll d to
Clock/Alarm
and press M.
2. Scroll
d to
Set Alarm
and press M.
3. Scroll
u or d to
O
,
On Once
or
On Daily
and press M.
4. If you select
On Once
or
On Daily
, enter the time using the 12 hour format
HH:MM
, e.g.
02:45.
5. Press
u or d to change from
A
(am) to
P
(pm) and press M.
6. Press
e to return to standby. When the alarm goes o, press any key to stop the ring.
NOTE
Once the alarm is set to ON, the
icon is displayed.
The alarm will ring at the medium level.
Alarm On
and the will flash on the display.
6.3 Setting the alarm melody
There are 3 alarm melodies.
1. Press
M and scroll d to
Clock/Alarm
.
2. Press
M.
3. Scroll
d to
Alarm Tone
and press M.
Melodies are played.
4. Scroll
u or d to select a melody.
5. Press
M to conrm.
6. Press
e to return to standby.
To Next Page
Loading...
Need help?
General
