Motorola IT6-2 - Call Barring Configuration and Defaults

34 Advanced settings
4. Mode is displayed. Press M.
5. Press
u or d to select On or O . Press M to conrm.
6. Press
e to return to standby. You can now set the number. (See below)
8.11.2 Set a number to be barred
1. Press M, scroll d to Advanced Set and press M.
2. Scroll
d to Call Barring . Press M.
3. Enter the master PIN (default setting 0000) and press
M.
4. Scroll
d to Number . Press M.
5. If necessary, scroll
u or d to the next available slot.
6. Press
M and enter the number or prex you want to bar. Press M to conrm.
7. Press
e to return to standby.
8.12 Default settings
Handset name HANDSET
Key tone On
Auto pick up O
Auto hang up On
Handset ringer melody Melody 2
Base ringer melody Melody 1
Handset High
Base Ringer volume Low
Earpiece volume 2
Phonebook Unchanged
Call list Empty
Redial list Empty
Master PIN 0000
Keypad lock O
Clock 12:00 A
Alarm O
Dial mode Tone
Answering Machine On
Answer Mode Record also
Outgoing message Pre-dened
Ring delay 4 rings
Remote Access On
Handset screening On
Base screening On