12 Using the Baby Monitor
3. Using the Baby Monitor
3.1 Setting up
• Place the baby unit in a convenient location (e.g. on a table) and point the
camera lens towards the area you want to monitor.
• Adjust the baby unit’s head angle by using the parent unit to pan and tilt the
camera up, down, left and right until you are satisfied with the image in the
parent unit.
NOTE
Do not place the baby unit within the baby's reach! If there is interference with
the picture or sound, try moving the units to different locations, and ensure they
are not close to other electrical equipment.
3.2 Pan and Tilt
The camera can be remotely controlled from the parent unit when in normal
video mode.
1. Press the
+ UP button or - DOWN button to tilt upward or downward.
2. Press the
< LEFT button or > RIGHT button to pan left or right.
3.3 Night Vision Mode
The baby unit has 8 high-intensity infrared LEDs for picking up clear images in
the dark. When the built-in photo sensor detects a low level of ambient light, the
LEDs will automatically activate and the screen on the parent unit will display in
black and white. The
N icon will be displayed on the screen.
3.4 Talk Mode
Press and hold the T TALK button on the parent unit to talk to your baby through
the baby unit’s loudspeaker. The
T icon will be displayed at the top of the LCD
screen.
3.5 Video ON/OFF
Press the V VIDEO ON/OFF key to turn the LCD display on or off, but still leave
the audio monitor on.
To Next Page
Loading...
Need help?
General
