MD7161 User Guide
40
Setting the Clock
NOTE: A flashing “CL” in the message window indicates that you must set the correct
day and time at the base unit.
1. Press the TIME button. The system announces the time and day of the week,
followed by
"To set day and time, press TIME/SET."
2. Press the
TIME button. The system announces the day.
3. Press the
CHANGE button repeatedly until the system announces the correct day.
4. Press the
TIME button to save the new setting. The system announces the setting.
5. Press the
CHANGE button repeatedly until the system announces the correct hour.
NOTE: Be sure to select the correct time of day (e.g., 3 AM or 3 PM).
6. Press the
TIME button to save the new setting. The system announces the minute.
7. Press
CHANGE to advance the minutes one at a time. –OR– Press and hold the
CHANGE button to advance the minutes in increments of 10.
8. Press the
TIME button to save the new setting. The system announces the year.
9. Press
CHANGE to advance the year one at a time. –OR– Press and hold CHANGE to
advance the years in increments of 10. When the system announces the correct
year, press
TIME. The system announces the clock setting.
To Next Page
Loading...
Need help?
General
