MD7161 User Guide
47
REMOTE ACCESS COMMANDS
FUNCTION COMMAND
Play messages in a mailbox Press #, then the desired mailbox number (1, 2, 3). The system plays
new messages. If there are no new messages, the system plays old
messages.
Repeat a message Press #4 while message is playing; press #4 twice to replay previous
message.
Skip a message Press #6 while message is playing; each press advances to next
message.
Stop
Play menu options
Press #5.
Save messages Hang up.
Delete message Press #9 while message is playing.
Review announcement Press #7; system plays announcement, then beeps.
Record announcement Press *7; after beep, record announcement, press #5 to stop. System
plays back announcement.
Record memo Press *8, then the mailbox number where you want memo recorded;
speak after the system announces “Now recording.” Press #5 to stop.
End remote access call Press *0
Turn system off Press #0; the system announces, “Answering machine off.” Press #0
again to turn the system back on.
Turn system on When system is off, it answers after 10 rings and announces, “Please
enter your security code.” Enter your remote access code.
To Next Page
Loading...
Need help?
General
