34 Handset setting
8.11 To set PBX Access Code
If the phone is connected to a switchboard, you may need to enter an PBX Access Code in
the dialling sequence to be able to connect to the outside line.
The PBX Access Code will be displayed at the beginning of a number on the screen. The
code can be up to 4 digits long.
The PBX Access Code will not be used when you dial the number manually (such as
when you are not dialling from the phonebook). This allows you to make calls to other
switchboard extensions.
1. Press
Menu
, scroll D to
Settings
and press
Select
.
2.
Set Handset
is highlighted. Press
Select
.
3. Scroll
D to
PBX Access Code
and press
Select
.
4. Scroll
U or D to
O
,
On
or
Set Code
then press
Select
.
If you select
Set Code
, enter the switchboard access code e.g. 9 then press
Save
.
5. Press
n to return to standby mode.
To Next Page
Loading...
Need help?
General
