40 Registration
10.2 To select a base
You can register the handset with up to 4 bases. Once registered, you can switch between
bases, for example, bases at home and at work.
1. Press
Menu
, scroll D to
Registration
and press
Select
.
2. Scroll
D to
Select Base
and press
Select
.
3. All the base numbers are displayed.
(
In use
) is shown beside the base number where the handset was previously registered
to. Scroll
U or D to the base you want and press
Select
.
4. The display shows
Searching Base
X
….
When registration is complete, the handset
returns to standby mode.
10.3 To de-register a handset
Use one handset to de-register another. You cannot de-register the handset that you are
using.
1. Press
Menu
, scroll D to
Registration
and press
Select
.
2. Scroll
D to
De-register
and press
Select
.
3. Enter the System PIN and press
OK
. (default setting = 0000)
4. Scroll
U or D to the handset you want to de-register and press
Select
.
5. Press
Ye s
to conrm or
No
to cancel.
6. Press
n to return to standby mode.
To Next Page
Loading...
Need help?
General
