17
GETTING STARTED
coverage. This can help determine when a
radio is moving out of range.
Note: Obstacles that block the signal path may
affect the strength of the incoming signal.
TALK RANGE
Estimated talk range for RDM2070d is up to
220,000 sq ft (inside steel/concrete industrial
buildings) and up to 13 floors (inside multi-level
buildings).
To talk with someone on your two-way radio,
the channel, frequency, and interference
eliminator code must be the same on both
radios, which will depend on the stored profile
that has been preprogrammed on the radio:
1. Channel: Current channel that the radio is
using.
2. Frequency: The frequency your radio uses to
transmit/receive.
3. Interference Eliminator Code: These codes help
minimize interference by providing you with a
choice of code combinations.
4. Scramble Code: Codes that make your
transmissions sound garbled to anyone
listening who is not set to that specific code.
5. Bandwidth: Frequencies have selectable
channel spacing, which must match other
radios for optimum audio quality.
For details of how to set up frequencies and
PL/DPL codes in your channels refer to the
‘Programming Mode’ Section.
(*) For information on other RDX models with
higher talk range visit us at https://
www.motorolasolutions.com/rdx
To Next Page
Loading...
Need help?
General
