RADIO OVERVIEW
English
12
On/Off/Volume Knob
Used to turn the radio ON or OFF and to adjust
the radio’s volume.
Channel Selector Knob
Used to switch the radio to different channels.
Accessory Connector
Used to connect compatible audio accessories.
Model Label
Indicates the model of the radio.
Microphone
Speak clearly into the microphone when
sending a message.
Antenna
For models RMU2080, and RMV2080 the
antennas are non-removable.
LED Indicator
Used to give battery status, power-up status,
radio call information and scan status.
Side Buttons
Push-to-Talk (PTT) Button
•
Press and hold down this button to talk,
release to listen it.
Side Button 1 (SB1)
•
The Side Button 1 is a general button that
can be configured by the Computer
Programming Software - CPS. The default
setting of SB1 is
‘Monitor’.
Side Button 2 (SB2)
•
The Side Button 2 is a general button that
can be configured by the CPS. The SB2
default setting is ‘Scan/Nuisance Channel
Delete’.
The Lithium-Ion (Li-Ion) Battery
RM Series radios include a standard capacity
battery. Other batteries may be available. For
more information, see “Battery Features” on
page 14.
To Next Page
Loading...
Need help?
General
