GETTING STARTED
English
30
Notes:
• To listen to all activity on a current channel, short
press the SB1 to set the CTCSS/DPL code to 0.
This feature is called ‘CTCSS/DPL Defeat
(Squelch set to SILENT)’.
• (*) This assumes SB1 is not being programmed
for a different mode.
RECEIVING A CALL
Select a channel by rotating the Channel
Selector Knob until you reach the desired
channel. Voice announcement will indicate the
channel selected.
1. Make sure the PTT button is released and listen
for voice activity.
2.
The LED Indicator will be solid Red while the
radio is receiving a call.
3.
To respond, hold the radio vertically 1 to 2
inches (2.5 to 5cm) from mouth. Press the PTT
button to talk; release it to listen.
TALK RANGE
TALK RANGE
Model
Industrial Multi-Level
Inside steel/concrete
Industrial buildings
Inside multi-level
buildings
UHF 2W Up to 250,000 Sq. Ft. Up to 20 Floors
VHF 2W Up to 220,000 Sq. Ft. Up to 13 Floors
To Next Page
Loading...
Need help?
General
