PROGRAMMING
FEATURES
English
47
Editing Scan List
Scan Lists can be edited by using the CPS
(refer to CPS section on page 46)
Nuisance Channel Delete
Nuisance Channel Delete allows you to
temporarily remove channels from the
Scan List. This feature is useful when
frequent, irrelevant conversations on a
channel tie up the scanning feature,
becoming a nuisance to the user.
To delete a channel from the Scan List:
• To start scanning, press the SBx (x=1
or x=2) button (Scan has to be
programmed to either SB1 or SB2 via
CPS). SB2 by default programmed to
Scan/Nuisance Channel Delete
•
Wait until the radio stops on the
channel you wish to eliminate, then
long press the SBx button to delete it.
(Cannot delete home channel - the
channel that the user enables scan on).
•
The channel will not be scanned again
until you exit Scan by short pressing
the SBx button again or by turning the
radio OFF and back ON.
To Next Page
Loading...
Need help?
General
