EasyManuals Logo
Home>MSI>Motherboard>MEG X299 CREATION

MSI MEG X299 CREATION User Manual

MSI MEG X299 CREATION
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #101 background imageLoading...
Page #101 background image
Rebuilding RAID Array
A RAID 1, RAID 5 or RAID 10 volume is reported as Degraded when one of its hard
drive members fails or is temporarily disconnected, and data mirroring is lost. As a
result, the system can only utilize the remaining functional hard drive member. To
re-establish data mirroring and restore data redundancy, refer to the procedure below
that corresponds to the current situation.
1. Power off.
2. Replace the failed hard drive with a new one that is of equal or greater capacity.
3. Reboot the system and go to BIOS > SETTING > Advanced > Intel(R) Rapid Storage
Technology.
4. Select the Degraded RAID volume from the Intel(R) Rapid Storage Technology
screen to enter the RAID VOLUME INFO screen.
5. Select the Rebuild item and press Enter key to rebuild the new hard drive.
101
RAID Configuration

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the MSI MEG X299 CREATION and is the answer not in the manual?

MSI MEG X299 CREATION Specifications

General IconGeneral
Memory channelsQuad-channel
Memory slots typeDIMM
Number of memory slots4
Supported memory typesDDR4-SDRAM
Supported memory clock speeds4100, 2133, 2400, 2666, 2800, 2933, 3000, 3200, 3333, 3400, 3466, 3600, 3733, 3800, 4000, 4200 MHz
Processor socketLGA 2066 (Socket R4)
Processor manufacturerIntel
Compatible processor seriesIntel® Core™ X-series
Supported processor socketsLGA 2066
USB 2.0 connectors2
ATX Power connector (24-pin)Yes
Number of SATA II connectors0
Number of SATA III connectors8
USB 3.2 Gen 2 (3.1 Gen 2) connectors1
RAID levels0, 1, 5, 10
Supported storage drive typesHDD & SSD
Supported storage drive interfacesSATA III, U.2
BIOS typeUEFI AMI
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio chipRealtek ALC1220
Component forPC
Motherboard chipsetIntel® X299
Audio output channels7.1 channels
Motherboard form factorExtended ATX
Windows operating systems supportedWindows 10
LAN controllerRealtek RTL8125-CG, Intel I219-V
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Bluetooth version5.0
Ethernet interface type2.5 Gigabit Ethernet, Gigabit Ethernet
Parallel processing technology supportCrossFire, SLI
Cables includedSATA
Weight and Dimensions IconWeight and Dimensions
Depth272 mm
Width305 mm

Related product manuals