CHAPTER 3
AMI
®
BIOS USERS GUIDE
3-6
Description of the item on screen follows:
Quick Boot
Set this option to Enabled to permit AMI
®
BIOS to boot within 5
seconds. This option replaces the old ABOVE 1 MB Memory Test option.
The Setup default setting is Enabled. The BIOS default setting is Disabled.
1st Boot Device/2nd Boot Device/3rd Boot Device
This option sets the sequence of boot drives.
The settings are:
Disabled Disable this sequence
IDE-0 The system will boot from the first HDD.
IDE-1 The system will boot from the Second HDD.
IDE-2 The system will boot from the Third HDD.
IDE-3 The system will boot from the Fourth HDD.
Floppy The system will boot from Floppy.
ZIP A:/LS120 The system will boot from LS-120 (120M Floppy).
Atapi ZIP C: The system will boot from the ZIP.
CDROM The system will boot from the CD-ROM
SCSI The system will boot from the SCSI.
Network The system will boot from the Network drive.
Initial Display Mode
Set this option to BIOS mode for normal boot-up. Silent mode to
show the MSI logo during system boot-up. The settings are BIOS or Silent.
To Next Page
Loading...
Need help?
General
