CHAPTER 3
AMI
®
BIOS USERS GUIDE
3-20
Description of the item on screen follows:
Onchip IDE
This item allows you to set the Onchip IDE controller.
Floppy Controller
This item allows you to Enabled or Disabled the onboard FDC.
Choose Auto to allow the BIOS to automatically detect the device. The
default setting is Auto.
Serial Port A/Serial Port B
Choose Auto, for the BIOS to automatically detect the device.
Serial PortB Mode
This item allows the user to determine which InfraRed (IR) function
of the onboard I/O chip. The settings are Normal, IRDA and ASK IR. The
default setting is Normal.
Parallel Port
Choose Auto, the BIOS automatically assigned onboard parallel
port to the available parallel port or disabled.
Parallel Port Mode
This option allows user to choose the operating mode of the
onboard parallel port. The settings are Normal, SPP/EPP or ECP mode.
EPP Version
This option is for setting which EPP version will be used. The
settings are 1.7 and 1.9.
To Next Page
Loading...
Need help?
General
