3-12
MS-7346 Mainboard
On-Chip SATA Controller
This item allows you to enable or disable the SATA controller.
RAID Mode
This item is used to enable/disable the RAID function for SATA devices.
SATA1 / SATA2 / SATA3 / SATA4
When the RAID Mode sets to RAID, these items will available.These items allow
users to enable or disable the RAID function for each SATA hard disk drive.
I/O Device Configuration
Press <Enter> to enter the sub-menu:
COM Port 1
Select an address and corresponding interrupt for the first serial port.
7350v1.0-3_ami.p65 2007/3/6, 上午 11:5812
To Next Page
Loading...
Need help?
General
